LG STUDIO LSWS306ST Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
12
FEATURES
TIMER ON/OFF
The TIMER ON/OFF serves as an extra timer in the kitchen
that beeps when the set time has run out. It does not start
or stop cooking. The TIMER ON/OFF feature can be used
during any of the other oven control functions. The timers
can be operated independently of each other.
Setting the Timer
1. Set Oven Mode knobs to the OFF position.
2. Touch the TIMER ON/OFF. 0:00 with
HR
inside it
appears and TIMER ashes in the display.
3. Turn the Time/Temp knob to set the desired time.
Turn the knob clockwise to increase the time and
counterclockwise to decrease the time.
If the TIMER ON/OFF is not touched, the timer
returns to the time of day.
NOTE
4. Touch the TIMER ON/OFF to start the timer. The
display shows the set time counting down.
5. When the set time runs out End shows in the
display. The indicator tones sound every 15 seconds
until the TIMER ON/OFF is touched.
6. To cancel the timer, touch the TIMER ON/OFF once.
The display will return to the time of day.
If the remaining time is not shown in the display,
recall the remaining time by touching the TIMER
ON/OFF.
- Touch the TIMER ON/OFF once to set the time in
hours and minutes.
- Touch the TIMER ON/OFF twice to set the time
in minutes and seconds.
NOTE
CONVECTION AUTO CONVERSION
When cooking using the convection mode (Conv. Bake,
Conv. Roast, and Crisp Conv.), the oven temperature is
automatically reduced by 25°F(14°C). The display will show
the changed temperature.
This feature is called auto conversion. Your oven comes
with this feature enabled.
To disable the auto conversion feature, do the following:
1. Set Oven Mode knobs to the OFF position.
2. Touch and hold START TIME for 3 seconds. Then
touch START TIME once. Auto appears in the
display.
3. Turn the Time/Temp knob to enable or disable the
feature.
4. Touch START to accept the change.
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 87 88

Comments to this Manuals

No comments